Periodic maintenance and repair of CDDR Electric Pallet Stacker (3)
continuous
1.7 Maintenance for 600 hours(every three months)
During the maintenance every three months, the monthly maintenance process shall be repeated. When the parts must be adjusted and replaced, please contact with maintenance personnel of our company.
Contactor
Burnish the coarse surface of contacts using sand paper.
Replace according to the status when the function is not well.
Motor
Wearing status of carbon brush and selenium rectifier.
Brake
Clean the dirt and dust on friction plates of the brake, meanwhile check the wearing status of the friction plates.
1.8 Maintenance for 1200 hours(every six months)
During the maintenance for a half year, the maintenance process for three months shall be repeated. When the parts must be adjusted and replaced, please contact with maintenance personnel of our company.
Contactor
Burnish the coarse surface of contacts using sand paper.
Replace according to the status when the function is not well.
Motor
Wearing status of carbon brush and selenium rectifier.
Decelerate box
Replace the gear oil
Oil filter
clean
Brake
Clean the dirt and dust on friction plates of the brake, meanwhile check the wearing status of the friction plates.
Hydraulic system
Replace hydraulic oil. Check that whether there is any leakage in the lifting cylinder or not and replace the seals when necessary.
Fork wheel and bearings
Check the wearing condition, and replace them if necessary