Ningbo Ruyi Joint Stock Co.,Ltd [China (Mainland)]
Business Type:Manufacturer
City: Ningbo
Province/State: Zhejiang
Country/Region: China (Mainland)
Braking system | 1 | When the operation handle is turned, with the steering handle switching between area A and B, there is a noise from the brake. |
2 | The oil dirt and dust on the turning gearwheel should be cleaned. | |
3 | The clearance between brakes should be kept between 0.2mm and 0.8mm | |
Capability of electrolyte | 4 | Inspect the liquid level of electrolyte, pure water can be used for supplement if the liquid level is too low. |
Density of electrolyte | 5 | The specific gravity should be1.28g/ml after charged. |
Clean the storage battery | 6 | Cover the lid, and flush with tap water. |
Inspect the contactor | 7 | Burnish the coarse surface of contacts using sand paper. |
No. | Check point | Check content | |
Whole truck | 1 | Whole status | Abnormal or not. |
2 | Horn | Sound | |
Steering system, braking system, hydraulic system and lifting system | 3 | Operation handle | When the operation handle is turned, with the handle switching between area A and B, there is a noise from the brake. |
4 | Brake clearance | The clearance between brakes should be kept between 0.2mm and 0.8mm. | |
5 | Operation handle | Degree of tightness and rotary flexibility. | |
6 | Truck frame and fastener | Function,and check cracks, lubrication and tightness of fasteners. | |
7 | Connecting rod and wheel carrier | Function and check the cracks, bending, deformation and lubrication condition. | |
8 | Oil pipe | Whether oil pipes leak or not. | |
9 | Hydraulic oil | Proper quantity of oil. | |
10 | Lifting oil cylinder | Whether there is any oil leakage or not. | |
Storage battery, charger and electric system | 11 | Electrolyte | Liquid level,specific gravity and cleanness |
12 | Plug | Function, whether it is damaged or not | |
13 | Key switch | Function | |
14 | Contactor | Contact performance and function | |
15 | Inching switch | Function | |
16 | Controller | Function | |
17 | Driving motor | Wearing status of carbon brush and selenium rectifier. | |
18 | Lifting motor | Wearing status of carbon brush and selenium rectifier. | |
19 | Steering motor | Wearing status of carbon brush and selenium rectifier. | |
20 | Fuse | Whether it is perfect or not | |
21 | Wiring harness and connection terminals | Whether flexible and whether damaged or not. |